List Of All Rebates Click Here
Wednesday, October 7, 2015
Tuesday, February 25, 2014
Monday, February 24, 2014
Saturday, February 22, 2014
Friday, February 21, 2014
Tuesday, February 26, 2008
MIO Printer Error Code
You received MIO error codes if your printer is not properly connected to your computer or network or might have a communication problem meaning your printer cannot communicate with your printer servers. If all of your connections are checked and are working properly, other options are bad jet direct card or your network card to check if you have a bad network card go to your computer and try to ping your printer with 127.0.0.1 IP address if it comes back with no respond then you can check at the back of the printer if the card link light is on.If all is working and still getting the error code the you will need to replace your formatter board, which is install in your printer if you are not technical enough you might need a Service technician to do this because you will have to take the printer apart.
Friday, February 22, 2008
Constant Paper Jam
Constant Paper Jam is a comon problem to all laser jet printers, paper jam is ususlly caused by bad feed rollers or bad pick up rollers, in all laser jet printers there are a few rubber rollers and pads that picks up the paper and feed it through the printer for a finish prints but when the rollers or pads gone bad the paper get stuck and caused printer jam. There is a temporary fix when you having a bad paper jam and need to get work done until the service tech comes but this is only when you can't find a paper in the printer but still saying paper jam, Take a blank copy paper wet your hands with water and just shake your hands over the paper making the paper a little damp then send the paper throgh the printer without printing anything on it.
When you have a paper jam and can't see any paper inthe printer path this is because after some time of printers the paper dust is keep building up in your printer and the paper dust is also causing paper jam, this is the reason why heavely use printers need cleaning or printer service every 6 months by. Fail to clean your printers will result in a break or printer repairs.
When you have a paper jam and can't see any paper inthe printer path this is because after some time of printers the paper dust is keep building up in your printer and the paper dust is also causing paper jam, this is the reason why heavely use printers need cleaning or printer service every 6 months by. Fail to clean your printers will result in a break or printer repairs.
Wednesday, February 13, 2008
HP Printer Error Code 50***
Message on printer Display Panel
What it means.
What to do.
Additional comments.
50.4 PRINTER ERROR
A problem exists with the customer’s line voltage.
1. Remove the printer from any UPS supplies, additional power supplies, or power strips.
2. Plug the printer into a wall outlet and see if this resolves the problem.
3. If the printer is already plugged into a wall outlet, try another power source in the building that is independent of the one currently being used.
4. The line voltage and current source at the printer location might need to be inspected to ensure that it meets the printer’s electrical specifications.
50.X FUSER ERROR
A fuser error has occurred.
1. Turn the printer off, wait 10 minutes, and then turn the printer on.
2. If the message persists, reseat the fuser. If that does not work, replace the fuser. To check the fuser, turn the printer off and remove the fuser. Measure the resistance between the fuser connectors. If it is not within the proper range, replace the fuser. If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. If the problem is not related to the fuser, replace the engine controller board.
What it means.
What to do.
Additional comments.
50.4 PRINTER ERROR
A problem exists with the customer’s line voltage.
1. Remove the printer from any UPS supplies, additional power supplies, or power strips.
2. Plug the printer into a wall outlet and see if this resolves the problem.
3. If the printer is already plugged into a wall outlet, try another power source in the building that is independent of the one currently being used.
4. The line voltage and current source at the printer location might need to be inspected to ensure that it meets the printer’s electrical specifications.
50.X FUSER ERROR
A fuser error has occurred.
1. Turn the printer off, wait 10 minutes, and then turn the printer on.
2. If the message persists, reseat the fuser. If that does not work, replace the fuser. To check the fuser, turn the printer off and remove the fuser. Measure the resistance between the fuser connectors. If it is not within the proper range, replace the fuser. If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. If the problem is not related to the fuser, replace the engine controller board.
Small Business Cut cost and Save money
The number one cost that drive small business expence over the roof is their printing and repairs expences. The best way to control printing expences is by calculating your copies base on cost per page. e.g many business owners and also consumers when they are looking to purchase parinters or copiers 75 to 85 percent of the time they search for the cheaper printer or copier.
The most economic way to search for a printer or copier is by calculating the cost per page becasue the printer or copier cost will be a one time cost but your printer supplies like toners etc will be ongoing cost. So always look for ways to run your machine cheaper and not purchasing your machine cheaper.
The most economic way to search for a printer or copier is by calculating the cost per page becasue the printer or copier cost will be a one time cost but your printer supplies like toners etc will be ongoing cost. So always look for ways to run your machine cheaper and not purchasing your machine cheaper.
Subscribe to:
Posts (Atom)